#Skychart lx200 serial#
#Skychart lx200 drivers#
#Skychart lx200 driver#
#Skychart lx200 download#
#Skychart lx200 windows#

The settings will be saved for subsequent sessions. Optional, but required for accurate calculation of azimuth, altitude, and sidereal time.Д®levation: observing site elevation above sea level, in meters.Д¬lick the OK button when all settings have been entered. Longitude: the longitude of your observing location, as degrees, minutes, and seconds. Optional, but required for accurate calculation of azimuth, altitude, and sidereal time. Latitude: the latitude of your observing location, as degrees, minutes, and seconds. The test is not foolproof, so if you cannot obtain an accurate alignment using the recommended settings, youвЂ™ll need to experiment to find the correct settings.

Test button: clicking the Test button will guide you through a test of your encoder system to determine whether the Azimuth checkbox needs to be checked.

#Skychart lx200 driver#

Check this box only if you cannot obtain an accurate alignment any other way.ДЄzimuth: checking this box causes this software driver to reverse the rotational sense of the encoder counts returned for the RA/azimuth encoder. This box should normally be left unchecked. If this happens to you, manually edit the name so that it is correct.ДЄltitude: checking this box causes this software driver to reverse the rotational sense of the encoder counts returned for the DEC/altitude encoder.

#Skychart lx200 drivers#

Some bluetooth drivers donвЂ™t write their port names into the registry correctly, which can result in the names appearing incorrectly in the list of ports.

#Skychart lx200 serial#

The Serial Port field can be edited if necessary. Serial Port: the serial port to which your encoder interface is connected (required). RA/Azimuth Ticks/Rev: the number of encoder tics (in quadrature mode) traversed as your telescope makes one complete turn on its RA/azimuth axis (required)ДEC/Altitude Ticks/Rev: the number of encoder tics (in quadrature mode) traversed as your telescope makes one complete turn on its DEC/altitude axis (required) Interface type: the type of encoder interface between your computer and your telescope (required) Mount: the type of telescope mount youвЂ™re using (alt-az, German equatorial, or other equatorial) (optional)ДЇocal length: the focal length in meters (optional)ДЄperture Dia: the diameter of your telescopeвЂ™s aperture in meters (optional)ДЄperture Area: the unobstructed area of your telescopeвЂ™s aperture in square meters (optional) Name: a name for your telescope (optional)Дescription: a description of your telescope (optional)

#Skychart lx200 windows#

Windows Defender may pop up a screen like this, saying that it has вЂњprevented an unrecognized app from starting.вЂќД¤) In the Settings dialog box, enter the following information:

#Skychart lx200 download#

To install, just download the file using the link above, and then double-click it to run the installer. (Not all of these systems have been tested, but all should work with this driver.) Net 3.5 or higher.Дownload the ASCOM driver for Digital Setting Circles Supported Hardware The driver requires that ASCOM Platform 6 (or newer) is installed on your computer. This driver will not work with equatorial platforms. Equatorial mounts do not need to be accurately polar-aligned (although an accurate polar alignment will likely lead to a more satisfying observing experience). This driver works with either alt-az mounts (like a dobsonian) or equatorial mounts. This ASCOM driver allows the use of a variety of commercial and homebrew passive encoder-based digital setting circles systems with any Windows software that supports the ASCOM standard.

The remainder of this page describes the ASCOM driver I wrote for my digital setting circles project. ASCOM stands for the Astronomy Common Object Model.Дevelopers of astronomical software can use the ASCOM standard to allow their software to talk to any kind of telescope that includes an ASCOM-compliant driver, eliminating the need to develop a separate interface for each popular type of telescope out there. The ASCOM Initiative is a loosely-knit group of developers and astronomical instrument makers that work together to bring vendor-independent and language-independent plug-and play compatibility between astronomy software and astronomical instruments on Windows computers. ASCOM Driver for Digital Setting CirclesДЄSCOM is a standard developed for interfacing computers and telescopes.